Armoured Fittings
Female joint
Composition of fitting for multilayer - armoured pipe and dimensional characteristics
The Armoured female joint fitting is made up of the following components:
- N. 1 Hot moulded CW617N brass body
- N. 1 Hot moulded CW617N brass ring-tightener ring nut
- N. 1 Brass tube-clamping ring CW614N derived from bar
- N. 2 O-rings in nontoxic NBR 70 rubber. Compound suitable for contact with potable water approved: ACS No. 09 CLP LI 008 – TZW KTW D1 D2 of 19 Dec 2007 – NSF ANSI 61 N° IG770-01
- N. 1 O-ring in nontoxic EPDM 70 rubber
- N. 1 PTFE washer
The female threading of our fittings is cylindrical, in compliance with standard UNI ISO 228.
Specifications
Technical characteristics
Swipe to see the full table
| Code | Female threading diameter gas UNI 228 | Nominal diameter threading pipe PE | A (mm) | B (mm) | C (mm) | Unit weight (Kg) |
|---|---|---|---|---|---|---|
| RF_AFE032C | 1" | Ø 32 | 53 | 52 | 30 | 0.380 |
| RF_AFE040C | 1"1/4 | Ø 40 | 62 | 61.5 | 32 | 0.590 |
| RF_AFE050C | 1"1/2 | Ø 50 | 73 | 73.5 | 35.5 | 0.860 |
| RF_AFE063C | 2" | Ø 63 | 87 | 77 | 40 | 1.230 |
Related
